Copper Mountain Technologies S2 Series - Sens:corr:coll:adap:perm

S2VNA and S4VNA SCPI Programming Manual
219
SENS:CORR:COLL:ADAP:PERM
SENSe <Ch> :CORRection:COLLect:ADAPter:PERMittivity <numeric>
SENSe <Ch> :CORRection:COLLect:ADAPter:PERMittivity?
Description
Sets or reads out the value of the permittivity of an adapter media
in the adapter removal/insertion function.
When setting the adapter length, this parameter is used to
calculate the adapter delay; therefore this parameter must be set
before setting of the adapter length. When setting the adapter
delay, this parameter is not used.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the value of the permittivity of an adapter
Query Response
<numeric>
Preset Value
1.000649 (air)
Equivalent Softkeys
Calibration > Calibrate > Adapter Removal / Insertion > Permittivity