Copper Mountain Technologies S2 Series - Sour:pow:span

S2VNA and S4VNA SCPI Programming Manual
363
SOUR:POW:SPAN
SOURce <Ch> :POWer:SPAN <power>
SOURce <Ch> :POWer:SPAN?
Description
Sets or reads out the power span when the power sweep type is
active.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<power> the power sweep span value from 0 to maximum limit of the
analyzer
Unit
dBm (decibels above 1 milliwatt)
Resolution
0.05 dBm
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
Depends on the analyzer
Equivalent Softkeys
Stimulus > Span