Copper Mountain Technologies S2 Series - Calc:fsim:bal:dzc:stat

S2VNA and S4VNA SCPI Programming Manual
52
CALC:FSIM:BAL:DZC:STAT
CALCulate <Ch> :FSIMulator:BALun:DZConversion:STATe {OFF|ON|0|1}
CALCulate <Ch> :FSIMulator:BALun:DZConversion:STATe?
Description
Turns ON/OFF the differential impedance conversion function of
the balanced port.
(command/query)
Target
The channel <Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Fixture Simulator > Diff ZConversion > Diff ZConversion
[On/Off]