Copper Mountain Technologies S2 Series - Sens:swe:type

S2VNA and S4VNA SCPI Programming Manual
341
SENS:SWE:TYPE
SENSe <Ch> :SWEep:TYPE <char>
SENSe <Ch> :SWEep:TYPE?
Description
Sets or reads out the sweep type.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the sweep type:
LINear : Linear frequency sweep
LOGarithmic : Logarithmic frequency sweep
SEGMent : Segment frequency sweep
POWer : Power sweep
Query Response
{LIN|LOG|SEGM|POW}
Preset Value
LIN
Equivalent Softkeys
Stimulus > Sweep Type