Copper Mountain Technologies S2 Series - Calc:func:dom

S2VNA and S4VNA SCPI Programming Manual
94
CALC:FUNC:DOM
CALCulate <Ch> [:SELected]:FUNCtion:DOMain[:STATe] {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:FUNCtion:DOMain[:STATe]?
Description
Specify whether an arbitrary range or the entire sweep range is used
when the CALC:FUNC:EXEC command is executed.
(command/query)
Target
All traces of channel <Ch> (if the coupling is set to ON by the
CALC:FUNC:DOM:COUP command), the active trace of channel <Ch> (if
otherwise),
<Ch>={[1]|2|...16}
Parameter
Select the following :
{ON|1} : Arbitrary range
{OFF|0} : Entire sweep range
Query Response
{0|1}
Preset Value
0
Related Commands
CALC:FUNC:EXEC
CALC:FUNC:DOM:COUP
Equivalent Softkeys
None