Reads out the data array, which is the limit test result.
The array size is 4N, where N is the number of measurement
points.
For the n–th point, where n from 1 to N:
<numeric 4n–3> the stimulus value in the n–th point;
<numeric 4n–2> the limit test result in the n–th point;
–1: No limit
0: Fail
1: Pass
<numeric 4n–1> the upper limit value in the n–th point (0 – if
there is no limit)
<numeric 4n–0> the lower limit value in the n–th point (0 – if
there is no limit)
(query only)
To Next Page
Loading...