Copper Mountain Technologies S2 Series - Sens:corr:ext:auto:stop

S2VNA and S4VNA SCPI Programming Manual
287
SENS:CORR:EXT:AUTO:STOP
SENSe <Ch> :CORRection:EXTension:AUTO:STOP <frequency>
SENSe <Ch> :CORRection:EXTension:AUTO:STOP?
Description
Sets or reads out the stop value of the user span of the auto port
extension function.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the user span stop
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The analyzer's highest frequency
Equivalent Softkeys
Calibration > Port Extension > Auto Port Extension > User Span Stop