Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit:stan:fmin

S2VNA and S4VNA SCPI Programming Manual
236
SENS:CORR:COLL:CKIT:STAN:FMIN
SENSe:CORRection:COLLect:CKIT:STAN <Std> :FMINimum <numeric>
SENSe:CORRection:COLLect:CKIT:STAN <Std> :FMINimum?
Description
Sets or reads out the minimum frequency limit of the calibration
standard.
(command/query)
Target
Standard <Std> of the selected calibration kit,
<Std>={[1]|2|...N}, where N – the number of the standards in
the calibration kit
Parameter
<numeric> the minimum frequency limit form 0 to 1E14
Unit
Hz
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Define STDs > F min