Copper Mountain Technologies S2 Series - Disp:upd; Disp:wind:act

S2VNA and S4VNA SCPI Programming Manual
169
DISP:UPD
DISPlay:UPDate[:IMMediate]
Description
Updates the display once, when the display update is set to OFF by
the DISP:ENAB command.
(no query)
Related Commands
DISP:ENAB
Equivalent Softkeys
None
DISP:WIND:ACT
DISPlay:WINDow <Ch> :ACTivate
Description
Sets the active channel.
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Notes
At attempt to set to the active channel the channel, which is not
displayed by the DISP:SPL command, an error occurs.
Related Commands
DISP:SPL
Equivalent Softkeys
Display > Active Trace / Channel > Active Channel