Copper Mountain Technologies S2 Series - Sour:pow:port

S2VNA and S4VNA SCPI Programming Manual
355
SOUR:POW:PORT
SOURce <Ch> :POWer:PORT <Pt> [:LEVel][:IMMediate][:AMPLitude] <power>
SOURce <Ch> :POWer:PORT <Pt> [:LEVel][:IMMediate][:AMPLitude]?
Description
Sets or reads out the power level of each port for the frequency
sweep type when the port couple feature is set to OFF by the
SOUR:POW:PORT:COUP command.
(command/query)
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2} for S2VNA or {[1]|2|3|4} for S4VNA
Parameter
<power> the power level within the power limits of the analyzer.
Unit
dBm (decibels above 1 milliwatt)
Resolution
0.05 dBm
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Power > Port Power > Port n