Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
401
TRIG:EXT:POS
TRIGger[:SEQuence]:EXTernal:POSition <char>
TRIGger[:SEQuence]:EXTernal:POSition?
Description
Selects the position of the external trigger. The Analyzer waits for
external trigger:
 Before sampling, when the frequency of the stimulus port have
been set.
 Before the frequency setup and subsequent measurement. The
frequency change of the stimulus port begins when the external
trigger arrives.
Depending on the command TRIG:SEQ:POIN the external trigger wait
occurs before each point or before the first point of the full sweep cycle.
(command/query)
Parameter
<char> Choose from:
BSAM : Before sampling
BSET : Before frequency setup
Query Response
{BSAM|BSET}
Preset Value
BSAM
Related Commands
TRIG:SOUR
Equivalent Softkeys
Stimulus > Trigger > Ext Trig > Position > { Before sampling | Before
setup }

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English