Copper Mountain Technologies S2 Series - Calc:tran:time:stim

S2VNA and S4VNA SCPI Programming Manual
159
CALC:TRAN:TIME:STIM
CALCulate <Ch> [:SELected]:TRANsform:TIME:STIMulus <char>
CALCulate <Ch> [:SELected]:TRANsform:TIME:STIMulus?
Description
Selects the stimulus type for the time domain transformation
function: impulse or step.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the stimulus type:
IMPulse : Impulse
STEP : Step
Query Response
{IMP|STEP}
Preset Value
IMP
Equivalent Softkeys
Analysis > Time Domain > Type > { Bandpass | Lowpass Step | Lowpass
Impulse }