Copper Mountain Technologies S2 Series - Disp:col:back

S2VNA and S4VNA SCPI Programming Manual
162
DISP:COL:BACK
DISPlay:COLor:BACK <numeric 1> , <numeric 2> , <numeric 3>
DISPlay:COLor:BACK?
Description
Sets or reads out the background color for trace display.
(command/query)
Parameter
<numeric 1> Red value R from 0 to 255;
<numeric 2> Green value G from 0 to 255;
<numeric 3> Blue value B from 0 to 255.
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric 1>, <numeric 2>, <numeric 3>
Preset Value
0, 0, 0
Equivalent Softkeys
Display > Properties > Color > Background > { Red | Green | Blue }