Copper Mountain Technologies S2 Series - Calc:filt:time:cent

S2VNA and S4VNA SCPI Programming Manual
86
CALC:FILT:TIME:CENT
CALCulate <Ch> [:SELected]:FILTer[:GATE]:TIME:CENTer <time>
CALCulate <Ch> [:SELected]:FILTer[:GATE]:TIME:CENTer?
Description
Sets or reads out the gate center value of the gating function.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<time> the center value of the gate, the range varies depending on the
frequency span and the number of points
Unit
s (second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Analysis > Gating > Center