Copper Mountain Technologies S2 Series - Sens:corr:tran:time:loss; Sens:corr:tran:time:rvel

S2VNA and S4VNA SCPI Programming Manual
306
SENS:CORR:TRAN:TIME:LOSS
SENSe <Ch> :CORRection:TRANsform:TIME:LOSS <numeric>
SENSe <Ch> :CORRection:TRANsform:TIME:LOSS?
Description
Sets or reads out the cable loss value for the cable correction function,
when the time domain transformation function is turned ON.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the cable loss value.
Unit
dB/m (decibell / meter)
Query Response
<numeric>
Preset Value
0 dB/m
Equivalent Softkeys
Analysis > Time Domain > Cable Correction > Cable Loss
SENS:CORR:TRAN:TIME:RVEL
SENSe <Ch> :CORRection:TRANsform:TIME:RVELocity <numeric>
SENSe <Ch> :CORRection:TRANsform:TIME:RVELocity?
Description
Sets or reads out the cable relative wave speed velocity for the cable
correction function, when the time domain transformation function is
turned ON.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the cable velocity factor.
Query Response
<numeric>
Preset Value
1.0
Equivalent Softkeys
Analysis > Time Domain > Cable Correction > Velocity Factor