Copper Mountain Technologies S2 Series - Calc:lim:offs:stim

S2VNA and S4VNA SCPI Programming Manual
108
CALC:LIM:OFFS:STIM
CALCulate <Ch> [:SELected]:LIMit:OFFSet:STIMulus <stimulus>
CALCulate <Ch> [:SELected]:LIMit:OFFSet:STIMulus?
Description
Sets the value of the limit line offset along X–axis.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<stimulus> the value of the limit line offset along X–axis
Unit
{ Hz | s | dBm }
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Analysis > Limit Test > Limit Lines Offsets > Stimulus Offset