Copper Mountain Technologies S2 Series - Syst:time; Syst:term

S2VNA and S4VNA SCPI Programming Manual
396
SYST:TIME
SYSTem:TIME <numeric 1> , <numeric 2> , <numeric 3>
SYSTem:TIME?
Description
Sets or reads out the current time.
(command/query)
Parameter
<numeric 1> hours from 0 to 23;
<numeric 2> minutes from 0 to 59;
<numeric 3> seconds from 0 to 59.
Query Response
<numeric 1>, <numeric 2>, <numeric 3>
Equivalent Softkeys
None
SYST:TERM
SYSTem:TERMinate
Description
Terminates the analyzer software.
(no query)
Equivalent Softkeys
None