Copper Mountain Technologies S2 Series - Sens:band; Sens:bwid; Sens:corr:cle

S2VNA and S4VNA SCPI Programming Manual
208
SENS:BAND
SENSe <Ch> :BANDwidth[:RESolution] <frequency>
SENSe <Ch> :BANDwidth[:RESolution]?
SENS:BWID
SENSe <Ch> :BWIDth[:RESolution] <frequency>
SENSe <Ch> :BWIDth[:RESolution]?
Description
Sets or reads out the IF bandwidth.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the IF bandwidth value
Unit
Hz (Hertz)
Out of Range
Sets the value of the analyzer limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10 kHz
Resolution
In steps of 1, 1.5, 2, 3, 5, 7
Equivalent Softkeys
Average > IF Bandwidth
SENS:CORR:CLE
SENSe <Ch> :CORRection:CLEar
Description
Clears the calibration coefficient table.
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Equivalent Softkeys
None