Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit:stan:del

S2VNA and S4VNA SCPI Programming Manual
234
SENS:CORR:COLL:CKIT:STAN:DEL
SENSe:CORRection:COLLect:CKIT:STAN <Std> :DELay <numeric>
SENSe:CORRection:COLLect:CKIT:STAN <Std> :Delay?
Description
Sets or reads out the offset delay value for the calibration
standard.
(command/query)
Target
Standard <Std> of the selected calibration kit,
<Std>={[1]|2|...N}, where N – the number of the standards in
the calibration kit
Parameter
<numeric> the offset delay value form –1E18 to 1E18
Unit
s (second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Define STDs > Offset Delay