Copper Mountain Technologies S2 Series - Disp:wind:trac:mem

S2VNA and S4VNA SCPI Programming Manual
176
DISP:WIND:TRAC:MEM
DISPlay:WINDow <Ch> :TRACe <Tr> :MEMory[:STATe] {OFF|ON|0|1}
DISPlay:WINDow <Ch> :TRACe <Tr> :MEMory[:STATe]?
Description
Turns ON/OFF the memory trace display.
(command/query)
Target
Trace <Tr> of channel <Ch>,
<Tr>={[1]|2|...16}
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Notes
If the memory trace does not exist, an error occurs and the command is
ignored.
Equivalent Softkeys
Display > Display > Memory | Data & Memory (ON)
Display > Display > { Data | OFF } (OFF)