Copper Mountain Technologies S2 Series - Mmem:stor:snp; Mmem:stor:snp:form

S2VNA and S4VNA SCPI Programming Manual
201
MMEM:STOR:SNP
MMEMory:STORe:SNP[:DATA] <string>
Description
Saves the measured S–parameters of the active channel into a
Touchstone file. The file type (1–port to 4–port) is set by the
MMEM:STOR:SNP:TYPE:SxP command.
(no query)
Target
Active channel, set by the DISP:WIND:ACT command
Parameter
<string> File name
Notes
If the full path of the file is not specified, the \FixtureSim subdirectory of
the application directory will be searched for the file. The file has *.sNp
extension by default.
Equivalent Softkeys
Save/Recall > Save Data to Touchstone File > Save File…
MMEM:STOR:SNP:FORM
MMEMory:STORe:SNP:FORMat <char>
MMEMory:STORe:SNP:FORMat?
Description
Sets the data format for the S–parameter saving by the
MMEM:STOR:SNP command.
(command/query)
Parameter
<char> Choose from:
MA : Logarithmic Magnitude / Angle format
DB : Linear Magnitude / Angle format
RI : Real part /Imaginary part format
Query Response
{RI|DB|MA}
Preset Value
RI
Equivalent Softkeys
Save/Recall > Save Data to Touchstone File > Format