Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
238
SENS:CORR:COLL:CKIT:STAN:L1
SENSe:CORRection:COLLect:CKIT:STAN <Std> :L1 <numeric>
SENSe:CORRection:COLLect:CKIT:STAN <Std> :L1?
Description
Sets or reads out the L1 value for the short calibration standard.
(command/query)
Target
Standard <Std> of the selected calibration kit,
<Std>={[1]|2|...N}, where N – the number of the standards in
the calibration kit
Parameter
<numeric> the L1 value from –1E18 to 1E18
Unit
1E–24 H/Hz (Henry/Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Define STDs > L1 10
–24
H/Hz

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English