Copper Mountain Technologies S2 Series - Calc:mark:func:exec

S2VNA and S4VNA SCPI Programming Manual
125
CALC:MARK:FUNC:EXEC
CALCulate <Ch> [:SELected]:MARKer <Mk> :FUNCtion:EXECute
Description
Executes the marker search according to the specified criterion.
The type of the marker search is set by the CALC:MARK:FUNC:TYPE
command.
(no query)
Target
Marker <Mk> of the active trace of channel <Ch>,
<Ch>={[1]|2|...16}
<Mk>={[1]|2|...16}
Related Commands
CALC:MARK:FUNC:TYPE
CALC:MARK:FUNC:DOM
Equivalent Softkeys
Markers > Marker Search > { Maximum | Minimum }
Markers > Marker Search > Peak > { Search Peak | Search Max Peak |
Search Peak Left | Search Peak Right }
Markers > Marker Search > Target > { Search Target | Search Target Left
| Search Target Right }