Copper Mountain Technologies S2 Series - Mmem:load:rlim; Mmem:load:segm

S2VNA and S4VNA SCPI Programming Manual
193
MMEM:LOAD:RLIM
MMEMory:LOAD:RLIMit <string>
Description
Recalls the ripple limit table file. The file must be saved by the
MMEM:STOR:RLIM command.
(no query)
Target
Active trace of the active channel, set by the CALC:PAR:SEL command
Parameter
<string> File name
Notes
If the full path of the file is not specified, the \Limit subdirectory of the
application directory will be searched for the file. The ripple limit file has
*.rlm extension by default.
Equivalent Softkeys
Analysis > Ripple Limit > Edit Ripple Limit > Restore Ripple Limit Table
MMEM:LOAD:SEGM
MMEMory:LOAD:SEGMent <string>
Description
Recalls the segment table file. The file must be saved by the
MMEM:STOR:SEGM command.
(no query)
Target
Active channel, set by the DISP:WIND:ACT command
Parameter
<string> File name
Notes
If the full path of the file is not specified, the \Segment subdirectory of
the application directory will be searched for the file. The segment file
has *.seg extension by default.
Equivalent Softkeys
Stimulus > Segment Table > Recall…