Copper Mountain Technologies S2 Series - Sens:corr:coll:ecal:uch

S2VNA and S4VNA SCPI Programming Manual
248
SENS:CORR:COLL:ECAL:UCH
SENSe:CORRection:COLLect:ECAL:UCHar <char>
SENSe:CORRection:COLLect:ECAL:UCHar?
Description
Sets or reads out the characterization number used when
executing AutoCal (factory or user characterizations).
(command/query)
Target
AutoCal
Parameter
<char> Specifies the stimulus type:
CHAR0 : factory characterization
CHAR1 : user characterization 1
CHAR2 : user characterization 2
CHAR3 : user characterization 3
Query Response
{CHAR0|CHAR1|CHAR2|CHAR3}
Preset Value
CHAR0
Equivalent Softkeys
Calibration > AutoCal > Characterization