Copper Mountain Technologies S2 Series - Sens:aver:coun

S2VNA and S4VNA SCPI Programming Manual
207
SENS:AVER:COUN
SENSe <Ch> :AVERage:COUNt <numeric>
SENSe <Ch> :AVERage:COUNt?
Description
Sets or reads out the averaging factor, when the averaging function
turned on.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the averaging factor from 1 to 999
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10
Related Commands
SENS:AVER
Equivalent Softkeys
Average > Avg Factor