Copper Mountain Technologies S2 Series - Calc:mst:data

S2VNA and S4VNA SCPI Programming Manual
140
CALC:MST:DATA?
CALCulate <Ch> [:SELected]:MSTatistics:DATA?
Description
Reads out the math statistics values.
The statistics function is applied either over the whole range, or
within the range specified by CALC:MST:DOM command (the range
limits are determined by two markers).
The data include 3 elements:
<numeric 1> Mean value;
<numeric 2> Standard deviation;
<numeric 3> Peak–to–peak (difference between the
maximum value and the minimum value).
(query only)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Query Response
<numeric 1>, <numeric 2>, <numeric 3>
Related Commands
CALC:MST
Equivalent Softkeys
None