Reads out or writes the corrected data array.
The corrected data array is the data, whose processing is
completed excluding the formatting as the last step. Such data
represent S–parameter complex values.
The array size is 2N, where N is the number of measurement
points.
For the n–th point, where n from 1 to N:
<numeric 2n–1> the real part of corrected measurement;
<numeric 2n> the imaginary part of corrected measurement.
(Command/Query)
CALCulate<Ch>[:SELected]:DATA:SDATa - the active trace of channel,
CALCulate<Ch>:TRACe<Tr>:DATA:SDATa - the trace <Tr> of channel,
<Ch>={[1]|2|...16}
<Tr>={[1]|2|...16}
When data is being written it is recommended to hold the sweep before
and update the screen after write.
To Next Page
Loading...