Copper Mountain Technologies S2 Series - Calc:mark:bwid:type

S2VNA and S4VNA SCPI Programming Manual
116
CALC:MARK:BWID:TYPE
CALCulate <Ch> [:SELected]:MARKer:BWIDth:TYPE <char>
CALCulate <Ch> [:SELected]:MARKer:BWIDth:TYPE?
Description
Sets the type of the bandwidth search function.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the type of the bandwidth:
BPASs : Bandpass
NOTCh : Notch
Query Response
{BPAS|NOTC}
Preset Value
BPAS
Equivalent Softkeys
Markers > Marker Math > Bandwidth Search > Type