Copper Mountain Technologies S2 Series - Disp:wind:ann:mark:alig

S2VNA and S4VNA SCPI Programming Manual
170
DISP:WIND:ANN:MARK:ALIG
DISPlay:WINDow <Ch> :ANNotation:MARKer:ALIGn[:TYPE] <char>
DISPlay:WINDow <Ch> :ANNotation:MARKer:ALIGn[:TYPE]?
Description
Sets or reads out the alignment mode of the marker display
position of each trace, when the only active trace display feature is
turned OFF by the DISP:WIND:ANN:MARK:SING command.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Choose from:
VERTical : Vertical alignment
HORizontal : Horizontal alignment
NONE : No alignment
Query Response
{NONE|VERT|HOR}
Preset Value
NONE
Related Commands
DISP:WIND:ANN:MARK:SING
Equivalent Softkeys
Markers > Properties > Align > { Vertical | Horizontal | OFF }