Copper Mountain Technologies S2 Series - Calc:corr:offs:phas

S2VNA and S4VNA SCPI Programming Manual
78
CALC:CORR:OFFS:PHAS
CALCulate <Ch> [:SELected]:CORRection:OFFSet:PHASe <phase>
CALCulate <Ch> [:SELected]:CORRection:OFFSet:PHASe?
Description
Sets or reads out the value of the phase offset.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<phase> the phase offset value from –360 to 360
Unit
° (degree)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Scale > Phase Offset