Copper Mountain Technologies S2 Series - Sens:offs:rec:mult

S2VNA and S4VNA SCPI Programming Manual
326
SENS:OFFS:REC:MULT
SENSe <Ch> :OFFSet:RECeiver[:FREQuency]:MULTiplier <numeric>
SENSe <Ch> :OFFSet:RECeiver[:FREQuency]:MULTiplier?
Description
Sets or reads out the basic frequency range multiplier to get the
receiver frequency when the frequency offset feature is ON and
offset type is "SRCRcv".
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> multiplier from –1000 to 1000;
Unit
n/a
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1
Related Commands
SENS:OFFS:STAT
SENS:OFFS:TYPE
Equivalent Softkeys
Stimulus > Frequency Offset > Receivers > Multiplier