Copper Mountain Technologies S2 Series

To Next Page

To Previous Page

S2VNA and S4VNA SCPI Programming Manual

258

SENS:CORR:COLL:OPEN

SENSe

<Ch>

:CORRection:COLLect[:ACQuire]:OPEN

<port>

Description

Measures the calibration data of the open standard for the

specified port.

(no query)

Target

Channel <Ch>,

<Ch>={[1]|2|...16}

Parameter

<port> the number of the port from 1 to 2 (or 4)

Notes

The command starts the measurement immediately if the trigger source

for calibration set to the "Internal" by the command

SENS:CORR:TRIG:FREE, otherwise waits for the trigger signal. The

command blocks the execution of the subsequent commands until the

completion of the measurement.

Equivalent Softkeys

Calibration > Calibrate > Response (Open) > Open

Calibration > Calibrate > Full 1–Port Cal > Open

Calibration > Calibrate > One Path 2–Port Cal > Open

Calibration > Calibrate > Full 2–Port Cal > Port n Open

Copper Mountain Technologies S2 Series - Sens:corr:coll:open