Copper Mountain Technologies S2 Series - Calc:mark:func:ttr

S2VNA and S4VNA SCPI Programming Manual
130
CALC:MARK:FUNC:TTR
CALCulate <Ch> [:SELected]:MARKer <Mk> :FUNCtion:TTRansition <char>
CALCulate <Ch> [:SELected]:MARKer <Mk> :FUNCtion:TTRansition?
Description
Selects the type of the target transition, when the marker search
for transition is performed by the CALC:MARK:FUNC:EXEC command.
(command/query)
Target
Marker <Mk> of the active trace of channel <Ch>,
<Ch>={[1]|2|...16}
<Mk>={[1]|2|...16}
Parameter
<char> Specifies the type of the target transition:
POSitive : Positive target transition
NEGative : Negative target transition
BOTH : Both positive target transition and negative target
transition
Query Response
{POS|NEG|BOTH}
Preset Value
POS
Related Commands
CALC:MARK:FUNC:EXEC
Equivalent Softkeys
Marker > Marker Search > Target > Target Transition > { Positive |
Negative | Both }