Copper Mountain Technologies S2 Series - Sens:freq:span

S2VNA and S4VNA SCPI Programming Manual
315
SENS:FREQ:SPAN
SENSe <Ch> :FREQuency:SPAN <frequency>
SENSe <Ch> :FREQuency:SPAN?
Description
Sets or reads out the stimulus span value of the sweep range for
linear or logarithmic sweep type.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the stimulus span value from 0 to the maximum frequency
span of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
the maximum frequency span of the analyzer
Equivalent Softkeys
Stimulus > Span