Copper Mountain Technologies S2 Series - Calc:mark:math:flat:stat; Calc:mark:math:flat:dom:star

S2VNA and S4VNA SCPI Programming Manual
133
CALC:MARK:MATH:FLAT:STAT
CALCulate <Ch> [:SELected]:MARKer:MATH:FLATness:STATe {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:MARKer:MATH:FLATness:STATe?
Description
Turns ON/OFF the marker FLATNESS function.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Markers > Marker Math > Flatness > Flatness
CALC:MARK:MATH:FLAT:DOM:STAR
CALCulate <Ch> [:SELected]:MARKer:MATH:FLATness:STARt <numeric>
CALCulate <Ch> [:SELected]:MARKer:MATH:FLATness:STARt?
Description
Sets or reads out the number of the marker, which specifies the
start frequency of the FLATNESS function domain.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> marker number from 1 to 16
Query Response
<numeric>
Preset Value
1
Equivalent Softkeys
Markers > Marker Math > Flatness > Flatness Start