Copper Mountain Technologies S2 Series - Calc:fsim:send:zcon:stat; Calc:fsim:stat

S2VNA and S4VNA SCPI Programming Manual
71
CALC:FSIM:SEND:ZCON:STAT
CALCulate <Ch> :FSIMulator:SENDed:ZCONversion:STATe {OFF|ON|0|1}
CALCulate <Ch> :FSIMulator:SENDed:ZCONversion:STATe?
Description
Turns ON/OFF the port impedance conversion function.
(command/query)
Target
The channel <Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Fixture Simulator > Port Z Conversion > Port Z Conversion
CALC:FSIM:STAT
CALCulate <Ch> :FSIMulator:STATe {OFF|ON|0|1}
CALCulate <Ch> :FSIMulator:STATe?
Description
Turns ON/OFF the fixture simulation function.
(command/query)
Target
The channel <Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Fixture Simulator > Fixture Simulator