Copper Mountain Technologies S2 Series - Sens:corr:coll:thru:add:wav:cut

S2VNA and S4VNA SCPI Programming Manual
277
SENS:CORR:COLL:THRU:ADD:WAV:CUT
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:WAVeguide:CUToff <numeric>
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:WAVeguide:CUToff?
Description
Sets or reads out the value of the cutoff frequency of the
waveguide thru in the thru addition function.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the value of the cutoff frequency of the waveguide thru.
Query Response
<numeric>
Preset Value
1.0 GHz
Equivalent Softkeys
Calibration > Calibrate > Thru Addition > Cutoff Frequency