Copper Mountain Technologies S2 Series - Calc:mark:func:dom:star

S2VNA and S4VNA SCPI Programming Manual
123
CALC:MARK:FUNC:DOM:STAR
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain:STARt <stimulus>
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain:STARt?
Description
Sets or reads out the start value of the marker search range.
(command/query)
Target
All traces of channel <Ch> (if the marker search range coupling is set to
ON by the CALC:MARK:FUNC:DOM:COUP command), the active trace of
channel <Ch> (if otherwise),
<Ch>={[1]|2|...16}
Parameter
<stimulus> the start value of the marker search
Unit
{ Hz | s | dBm }
Query Response
<numeric>
Preset Value
Lower limit of the analyzer frequency range
Equivalent Softkeys
Markers > Marker Search > Search Start