Copper Mountain Technologies S2 Series - Sens:corr:stat; Sens:corr:tran:time:freq

S2VNA and S4VNA SCPI Programming Manual
305
SENS:CORR:STAT
SENSe <Ch> :CORRection:STATe {OFF|ON|0|1}
SENSe <Ch> :CORRection:STATe?
Description
Turns ON/OFF the S-parameter error correction.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Calibration > Correction
SENS:CORR:TRAN:TIME:FREQ
SENSe <Ch> :CORRection:TRANsform:TIME:FREQuency <frequency>
SENSe <Ch> :CORRection:TRANsform:TIME:FREQuency?
Description
Sets or reads out the frequency value at which the cable loss specified
for the cable correction function, when the time domain transformation
function is turned ON.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the frequency value.
Unit
Hz (Hertz)
Query Response
<numeric>
Preset Value
1 GHz
Equivalent Softkeys
Analysis > Time Domain > Cable Correction > Frequency