Copper Mountain Technologies S2 Series - Calc:mark:func:dom:coup

S2VNA and S4VNA SCPI Programming Manual
122
CALC:MARK:FUNC:DOM:COUP
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain:COUPle {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:MARKer:FUNCtion:DOMain:COUPle?
Description
If the arbitrary search range turned ON by the CALC:MARK:FUNC:DOM
command, specifies whether all traces of channel use the same range
(coupling) or each trace uses individual range when the marker
search is performed.
(command/query)
Target
All the traces of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
Specifies the search range coupling:
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
Markers > Marker Search > Couple