Copper Mountain Technologies S2 Series - Sens:swe:poin:time

S2VNA and S4VNA SCPI Programming Manual
340
SENS:SWE:POIN:TIME
SENSe <Ch> :SWEep:POINt:TIME <time>
SENSe <Ch> :SWEep:POINt:TIME?
Description
Sets or reads out the delay before measurement in each
measurement point.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<time> the measurement delay value from 0 to 0.3 sec.
Unit
s (second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Meas Delay