Copper Mountain Technologies S2 Series - Sens:corr:coll:thru:add:unit

S2VNA and S4VNA SCPI Programming Manual
274
SENS:CORR:COLL:THRU:ADD:UNIT
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:UNIT {SEConds|METers}
SENSe <Ch> :CORRection:COLLect:THRU:ADDition:UNIT?
Description
Selects the display units of the thru delay (length) in the thru
addition function.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
SEConds : Selects the seconds
METers : Selects the meters
Query Response
{SEC|MET}
Preset Value
SEConds
Equivalent Softkeys
Calibration > Calibrate > Thru Addition > Delay Unit