Copper Mountain Technologies S2 Series - Calc:mark:func:type

S2VNA and S4VNA SCPI Programming Manual
131
CALC:MARK:FUNC:TYPE
CALCulate <Ch> [:SELected]:MARKer <Mk> :FUNCtion:TYPE <char>
CALCulate <Ch> [:SELected]:MARKer <Mk> :FUNCtion:TYPE?
Description
Selects the type of the marker search, which is performed by the
CALC:MARK:FUNC:EXEC command.
(command/query)
Target
Marker <Mk> the active trace of channel <Ch>,
<Ch>={[1]|2|...16}
<Mk>={[1]|2|...16}
Parameter
<char> Specifies the type of the marker search:
MAXimum : Maximum value search
MINimum : Minimum value search
PEAK : Peak search
LPEak : Peak search to the left from the marker
RPEak : Peak search to the right from the marker
TARGet : Target search
LTARget : Target search to the left from the marker
RTARget : Target search to the right from the marker
Query Response
{MAX|MIN|PEAK|LPE|RPE|TARG|LTAR|RTAR}
Preset Value
MAX
Related Commands
CALC:MARK:FUNC:EXEC
Equivalent Softkeys
Markers > Marker Search > { Maximum | Minimum }
Markers > Marker Search > Peak > { Search Peak | Search Max Peak |
Search Peak Left | Search Peak Right }
Markers > Marker Search > Target > { Search Target | Search Target Left |
Search Target Right }