Copper Mountain Technologies S2 Series - Calc:fsim:bal:top:sbal

S2VNA and S4VNA SCPI Programming Manual
59
CALC:FSIM:BAL:TOP:SBAL
CALCulate <Ch> :FSIMulator:BALun:TOPology:SBALanced[:PPORts] <port1> , <port2> ,
<port3>
CALCulate <Ch> :FSIMulator:BALun:TOPology:SBALanced[:PPORts]?
Description
Sets or reads out the ports assigned to the balanced device when
its type is "SBALance".
(command/query)
Target
The channel <Ch>={[1]|2|...16}
Parameters
<port1> First port number
<port2> Second port number
<port3> Third port number
Query Response
<port1>, <port2>, <port3>
Preset Value
1,2,3
Related Commands
CALC:FSIM:BAL:DEV
Equivalent Softkeys
Analysis > Fixture Simulator > Topology > Port 1 (se) , Port 2 (bal)