Copper Mountain Technologies S2 Series - Mmem:tran; Outp

S2VNA and S4VNA SCPI Programming Manual
205
MMEM:TRAN?
MMEMory:TRANsfer? <string>
Description
Transfers the contents of a specified file from the Analyzer to the
external computer.
(command/query)
Parameter
<string> the file name with the full path
Query Response
Block data transfer format. For example:
#6001000<binary block 1000 bytes>
#6 Symbol # introduces the data block. The next number indicates
how many of the following digits describe the length of the
data block;
001000 Length of the data block;
Notes
The command is not applicable with the TCP/IP Socket protocol.
The file must be 20 Mbytes or less.
Equivalent Softkeys
None
OUTP
OUTPut[:STATe] {OFF|ON|0|1}
OUTPut[:STATe]?
Description
Turns ON/OFF the RF signal output. Measurements cannot be
performed when the RF signal output is turned OFF.
(command/query)
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
Stimulus > Power > RF Out