Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
143
CALC:MST:DOM:STOP
CALCulate <Ch> [:SELected]:MSTatistics:DOMain[:MARKer]:STOP <numeric>
CALCulate <Ch> [:SELected]:MSTatistics:DOMain[:MARKer]:STOP?
Description
Sets or reads out the number of the marker, which specifies the
stop frequency of the math statistics range.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> marker number from 1 to 16
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
2
Equivalent Softkeys
Markers > Marker Math > Statistics > Statistics Stop
CALC:RLIM
CALCulate <Ch> [:SELected]:RLIMit[:STATe] {OFF|ON|0|1}
CALCulate <Ch> [:SELected]:RLIMit[:STATe]?
Description
Turns ON/OFF the ripple limit test.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Analysis > Ripple Limit > Ripple Test

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English