Copper Mountain Technologies S2 Series - Syst:loc; Syst:port:swit:del

S2VNA and S4VNA SCPI Programming Manual
392
SYST:LOC
SYSTem:LOCal
Description
Sets the Analyzer to the local operation mode, when all the keys
on the front panel, mouse and the touch screen are active.
(no query)
Related Commands
SYST:REM
SYST:RWL
Equivalent Softkeys
None
SYST:PORT:SWIT:DEL
SYSTem:PORT:SWITchover:DELay[:STATe] {OFF|ON|0|1}
SYSTem:PORT:SWITchover:DELay[:STATe]?
Description
Turns ON/OFF the port switchover delay. The port switchover delay
from 0 to 10 ms (depending on the analyzer model) occurs when
the stimulus port number is changing.
(command/query)
Parameter
{ON|1} : ON
{OFF|0} : OFF
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
System > Misc Setup > Port Switchover Delay { On | OFF }