Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit; Sens:corr:coll:ckit:desc

S2VNA and S4VNA SCPI Programming Manual
221
SENS:CORR:COLL:CKIT
SENSe:CORRection:COLLect:CKIT[:SELect] <numeric>
SENSe:CORRection:COLLect:CKIT[:SELect]?
Description
Sets or reads out the number of the selected calibration kit in the
table of calibration kits. The selected calibration kit is used in the
subsequent calibration and is used for editing by the commands
SENS:CORR:COLL:CKIT:XXXX.
(command/query)
Parameter
<numeric> the number of the calibration kit from 1 to 64
Query Response
<numeric>
Preset Value
1
Equivalent Softkeys
Calibration > Cal Kit > Cal Kit n > Select
SENS:CORR:COLL:CKIT:DESC
SENSe:CORRection:COLLect:CKIT:DESCription <string>
SENSe:CORRection:COLLect:CKIT:DESCription ?
Description
Sets or reads out the calibration kit description string.
(command/query)
Target
Selected calibration kit
Parameter
<string>, up to 254 characters
Query Response
<string>
Equivalent Softkeys
Calibration > Cal Kit > Cal Kit n > Description