Copper Mountain Technologies S2 Series - Sens:corr:coll:ckit:ord:shor

S2VNA and S4VNA SCPI Programming Manual
224
SENS:CORR:COLL:CKIT:ORD:SHOR
SENSe:CORRection:COLLect:CKIT:ORDer:SHORt <port> , <numeric>
SENSe:CORRection:COLLect:CKIT:ORDer:SHORt? <port>
Description
Sets or reads out the number of the calibration standard of the
short type, used for the measurement of the specified port.
(command/query)
Target
Selected calibration kit
Parameter
<port> the number of the port from 1 to 2 (or 4)
<numeric> the number of the calibration standard
Out of Range
If the specified standard number is greater than the number of standards
in the kit, an error occurs. If the specified standard number is not the
short standard number, an error occurs.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Specify CLSs > Short Port x (Row)